普通会员

广州贝朗斯动力电源有限公司

联系人：陆灿成(先生)
会员： [当前离线] [加为商友] [发送信件]
电话：
手机：

来电时请说是 国际能源网 看到的

地区：广东
地址：中国广东省广州市白云区广州市白云区夏花二路28号

本公司其它产品

商品详情
供应商信息
联系方式
相关评论

品牌名称：广州贝朗斯动力电源有限公司

专业供应天津迅启蓄电池，天津属于工业比较发达城市，每年对XQ叉车蓄电池用量很多，迅启牌蓄电池目前在天津地区乃至全国各地建立销售网点，可快速响应当地服务商，提供**迅启XQ电瓶，广州贝朗斯是迅启电瓶广东代理商，面向国内二级叉车维修点、经销商批发业务，蓄电池作为直流系统的备用电源，平时由充电机浮充电，当发生故障时由蓄电池组提供不间断电源。阀空式密封铅酸蓄电池在长期浮充之后，常常会出现活性物质脱落、电解液干、极板变形、栅极腐蚀及硫化等现象，导致蓄电池容量降低甚至失效，而一旦发生故障需继续维持供电时，该电池就可能无法保证事故状态下的放电要求，从而扩大事故范围，因此实现对蓄电池故障早期预测具有重大意义。迅启蓄电池 https://in-en-com.oss-cn-beijing.aliyuncs.com/sell-img/berens/XgwRs-1616139859.jpg'/>

天津迅启蓄电池在当地广泛应用到各种物流叉车、平板车、牵引车上，特殊型铅酸蓄电池”标准的要求，设计铅酸蓄电池充、放电性能检验系统，能够完成煤矿用铅酸蓄电池恒流恒压充电、恒流放电、恒功率放电等检验项目。检验系统主要由处理器、IGBT隔离驱动、IGBT、系统信息检测电路、信号处理电路、显示屏、操作面板、计时器和恒温水槽等组成。迅启牌煤矿用铅酸蓄电池性能检验系统组成，其中处理器是整个控制系统的核心，用于对检验系统进行全程控制和调节；IGBT隔离驱动电路用于驱动信号的隔离、放大，实现正压导通、负压关断，提高实验装置的可靠性；IGBT用于对充、放电回路进行控制；系统信息检测电路由电压检测、电流检测和温度检测电路组成，用于采集系统的运行信息并反馈给处理器；信号处理电路对系统信息检测电路的输出信号调整，实现信号的隔离、转换；显示屏用于显示系统的运行状态；操作面板用于试验过程外部指令输入；计时器用于记录试验操作时间；恒温水槽通过水循环和加热装置控制试验环境温度，从而控制蓄电池内部温度，实现恒温充＼放电试验。系统同时具有过流、断线、反极、过热、掉电数据保存、上电自动恢复等保护功能。

迅启叉车蓄电池主要以2V单体为主，针对不同叉车叉货要求，配套不同电压电池组，以1.5吨为例，一般为48V，但有些 1.5吨是托盘车，配置要求就是24V的电池组了，容量不同，采用高强度紧装工艺，提高电池装配装度，防止活性物质脱落，提高电池使用寿命。采用增多酸量设计，确保电池不会因电解液枯竭缩短电池使用寿命，迅启牌蓄电池获得“安徽产品”、“安徽产品”、“安徽免检产品”称号。诚信服务是我公司一贯的经营方针，务实创新、追求是公司的座右铭。顾客的满意是迅启人追求的永恒主题，不断更新技术、提供高品质产品是我们永恒的任务。**快捷的售后服务是我们一直遵守的郑重承诺，我们将竭力生产产品去满足用户的高需求。如果是3吨起的电动叉车用蓄电池，一般是80V电池组。

Professional supply Tianjin Xunqi battery, Tianjin belongs to the more developed industrial city, a year of XQ forklift battery consumption, Xunqi battery brand to establish sales outlets in Tianjin region and around the country at present, can respond quickly to the local service providers, to provide high quality XQ Xunqi battery, Guangzhou Xunqi battery shell lens is Guangdong agents, for the domestic two grade forklift maintenance, dealer wholesale business, the battery as a backup power supply of DC system, usually by charging the floating charge, when a fault occurs by the battery to provide uninterrupted power supply. Air valve sealed lead-acid battery in the long float after often active material shedding, electrolyte, dry plate deformation, corrosion and sulfide gate phenomenon, resulting in reduced battery capacity or even failure, but in the event of failure to maintain the power supply, the battery could not guarantee the discharge accident state requirements, thereby expanding the accident therefore, implementation is of great significance for the early prediction of battery failure.
Tianjin Xunqi battery is widely used in various local logistics trucks, flatbed truck, tractor, special type lead-acid battery 'requirements, the design of lead-acid battery charge and discharge performance test system can complete mine lead-acid battery constant current constant voltage charging, constant current discharge and constant power discharge test project. The inspection system is composed of the processor, IGBT isolation driver, IGBT, system information detection circuit, signal processing circuit, display screen, operation panel, timer and constant temperature water tank. Xunqi board composed of inspection system of coal mine lead-acid battery performance, the processor is the core of the whole control system for the whole control and adjustment of the test system; IGBT isolation drive circuit for isolation, driving signal amplification, realize the positive pressure and negative pressure conduction off, improve the reliability of experimental device for control of IGBT; the charge and discharge circuit; information system by the current detection circuit and temperature detection circuit, voltage detection, used to run the information acquisition system and feedback to the processor; the output signal of the signal processing circuit to adjust the system information detection circuit, isolation, signal conversion; display is used to display the running state of the system; the operation panel for the test process of external command input; timer for recording test operation time; constant temperature water tank through the water cycle and add The thermal device to control the temperature of test environment, so as to control the internal temperature of the battery charge and discharge test, to achieve constant temperature. At the same time, the system has the protection function of over current, disconnection, reverse pole, over temperature, power down data storage and automatic restoration.
Xunqi forklift battery mainly 2V monomer, according to the different requirements of different forklift goods, supporting the battery voltage to 1.5 tons, for example, is generally 48V, but some 1.5 tons is pallet truck, configuration requirements is the 24V battery, the capacity is different, with high strength and tight fitting process, improve the battery assembly installed, to prevent the falling of the active material, improve the service life of the battery. The increase of acid design, ensure the battery electrolyte depletion will shorten the battery life, Xunqi battery brand won the 'Anhui quality products', 'Anhui famous brand', 'Anhui Mianjian products' title. Integrity service is my company's operating principles, pragmatic innovation, the pursuit of excellence is the motto of the company. Customer satisfaction is the eternal theme of the pursuit of fast, constantly updated technology, providing high-quality products is our eternal task. High quality and efficient after-sales service is our solemn commitment to abide by, we will strive to produce first-class products to meet the high demand of users. If it is 3 tons of electric forklift battery, usually 80V battery pack.

供应商信息

广州贝朗斯动力电源有限公司

进入公司首页

广州贝朗斯动力电源有限公司是一家专业致力于动力电源、储能电源、应急电源、启动电源等领域蓄电池系统方案提供商，设址于美丽的花城—广州，公司的成立，标志着牵引车蓄电池自主品牌正式破题，对于提升国内外电动叉车、风能**等产业的自主研发能力具有重要的战略意义，发展的过程中,不断与国内外多个电池科研机构交流合作，设计开发，规模不断扩大，未来对于叉车、汽车等各版块市场格局变化必将产生深远的影响。公司拥有良好的技术创新能力，配备了科研试验和综合测试设备，全面实施绿色运营，节能环保等每一个环节，致力于打造绿色产业，产品涉及范围...

公司名	广州贝朗斯动力电源有限公司	经营模式	生产型,贸易型
注册资本	200万人民币	注册时间	2012
公司所在地	广东	企业类型	企业单位
主营行业	电力行业 / 电力电气 / 电池、
主营产品或服务	叉车蓄电池\|叉车电池\|叉车电瓶\|电动叉车蓄电池\|铅酸蓄电池\|牵引蓄电池\|高尔夫球车电池\|观光车电瓶\|巡逻车蓄电池