BNK-LK400 流平手感剂
聚醚改性聚硅氧烷聚合物
特性 润湿难以润湿的底材 优点 强劲降低表面张力
显著的滑爽及抗刮伤剂 作防缩孔助剂
特别适用于橡胶油、PU、塑胶漆、五金烤漆 不影响重涂、不影响附着力
![]()
概述 高效聚醚改性有机硅助剂，强劲降低表面张力,润湿难以润湿的底材，防缩孔、显著的流平和**滑爽作用，作防缩孔助剂。
技术数据
外观（目测） 无色或淡黄色透明液体
相对密度（25℃） 1.081
粘度(CS, 25℃) 1250
折光指数(25℃) 1.430
活性物含量(%) 100
合适溶剂 苯类、酯类、醚类
注：本数据表所列数值只叙述了本产品典型的性质，不代表本公司技术标准。
应用领域 有机树脂改性交联剂，可改性聚氨酯、环氧树脂、丙烯酸树脂、醇酸树脂、光固化（UV）等，适用于溶剂型涂料，工业涂料、油墨、水性涂料油墨等系列。
使用方法 在生产过程中的任何阶段加入，也可后添加，一般在制漆完成后24小时后才发挥**效能，本品建议用溶剂稀释后添加。
推荐用量 本品的建议添加量为0.1-0.3%(按总配方计)，作手感剂和抗磨耐刮剂使用为1%-2%，建议使用前应试验以确定**用法和用量。
包装规格 25KG
储存运输 在常温下保持稳定
BNK-LK400 Leveling
Polyether modified polysiloxane polymer
Feature be able to wet the substrate that is hard to be;
Significant slip and anti-scratch agent;
Especially suitable for rubber oil、PU、plastic paint、metal paint.
Advantages reduce the surface tension of the coating powerfully;
Shrinkage holes for auxiliary;
Does not affect the re-coating and adhesion.
Outline High polyether modified silicone additives, strong surface tension and wetting is difficult to wet the substrate, shrink-holes, significantly smooth the flow of the role of permanent peace, as shrink-holes additives.
Technical Data
Colour Colorless or light yellow transparent liquid
Relative density (25 ℃) 1.081
Viscosity (CS, 25 ℃) 1250
Refractive Index (25 ℃) 1.430
Active substance content (%) 100
Suitable solvent Benzene, esters, ethers
Note: The value of this data table describes only the nature of this product typically do not represent the company's technology
standards.
Applications Modification of organic resin crosslinking agent, can be modified polyurethane, epoxy resin, acrylic resin, alkyd resin, light-cured (UV), etc., applicable to solvent-based coatings, industrial coatings, printing ink, water-based paint and ink etc.
Usage At any stage of the production process to join can also be added after. Generally paints 24 hours after the completion of maximum efficiency, the product diluted with solvent added after recommendation.
Recommended dosage
Recommended dosage of the goods 0.1-0.3% (based on total prescription dollars). To handle agents and anti-wear agent scratch using the 1% -2% is
recommended before testing to determine the optimal usage and dosage.
Packing 25KG
Storage and transportation
Stable at room temperature
