普通会员

河南省瑞朗机械设备有限公司

[诚信档案]
联系人：李光斌(先生)
会员： [当前离线] [加为商友] [发送信件]
邮件：
电话：
手机： [发送短信]

来电时请说是 国际能源网 看到的

地区：河南-郑州市-巩义市
地址：郑州经济技术开发区第七大街99号宏光合园1号楼107号

本公司其它产品

商品详情
供应商信息
联系方式
相关评论

品牌名称：河南省瑞朗机械设备有限公司

锤破制砂机供应厂家锤破制砂机锤破破碎机

锤式破碎机的保养方法有哪些

1、定期检查机器内部部件的磨损情况要定期检查机器内部部件的磨损情况，如中心入料管、锥帽、叶轮上、下流道衬板、圆周护板、鄂板的磨损程度，磨损较严重的要及时进行修补或更换，同时更换部件的重量、型号和尺寸等，一定都要按原来的部件参数进行更换。

2、做好润滑工作要经常注意并及时做好摩擦面的润滑工作，且所采用的润滑脂应根据使用的地点、气温条件而定，一般情况下采用钙基、钠基和钙钠基润滑脂;加入润滑脂时应先用洁净的或煤油清洗滚柱轴承的滚道，然后再加入，加入轴承座内的润滑脂应为其空间容积的50%左右，锤破制砂机生产厂家，而且每3~6个月更换一次，这样既确保了机器的正常运转又延长了使用寿命。

3、保持设备的清洁要经常保持设备的清洁，做到无积灰、无油污、不漏油、不漏水、不漏电、不漏灰，更要注意灰尘等杂物不得进入润滑系统和润滑部位，锤破制砂机现货销售，因为这些杂物不仅会破坏润滑油膜，而且会使设备失去润滑而增加磨损，缩短设备的使用寿命;尤其要注意对轴承的定期清洗，破碎机在作2000小时后，打开主轴总成对轴承进行清洗，一般工作7200小时后要更换新轴承。

What are the maintenance methods for hammer crushers

1. Regularly inspect the wear of internal components of the machine, such as the wear degree of the central feeding tube, cone cap, impeller upper and lower channel lining plates, circumferential guard plates, and jaw plates. Those with severe wear should be repaired or replaced in a timely manner. At the same time, the weight, model, and size of the replaced components must be replaced according to the original component parameters.

2. Regular attention should be paid to and timely lubrication of the friction surface when performing lubrication work, and the lubricating grease used should be determined according to the location of use and temperature conditions. Generally, calcium based, sodium based, and calcium sodium based lubricating greases are used; When adding lubricating grease, the raceway of the roller bearing should be cleaned with clean or kerosene first, and then added. The lubricating grease added to the bearing seat should be about 50% of its spatial volume. The manufacturer of the hammer sand making machine should replace it every 3-6 months, which ensures the normal operation of the machine and extends its service life.

3. To keep the equipment clean, it is necessary to regularly maintain its cleanliness, ensuring that there is no accumulation of dust, oil, oil, water, electricity, or dust. It is also important to note that dust and other debris should not enter the lubrication system and lubrication parts. Hammer sand making machines are sold in stock because these debris not only damage the lubricating oil film, but also cause the equipment to lose lubrication and increase wear, shortening its service life; Special attention should be paid to regular cleaning of bearings. After 2000 hours of operation, the crusher should open the main shaft assembly to clean the bearings. Generally, new bearings should be replaced after 7200 hours of operation.

供应商信息

河南省瑞朗机械设备有限公司

进入公司首页

河南省瑞朗机械设备有限公司位于河南省郑州巩义市，是一家生产销售各种破碎机械的厂家。本公司一直以“质量是企业生存的根本”这一原则，制造出众多名优产品，并销往国内外众多地区，获得了用户的良好口碑。本公司的服务宗旨：您的要求是我们的追求，你的满意是我们的目标！

公司名	河南省瑞朗机械设备有限公司	经营模式	暂未公布
注册资本	暂未公布	注册时间	2017
公司所在地	河南郑州市巩义市	企业类型	企业单位
资料认证
主营行业	煤炭行业 / 采矿/选矿设备、冶金矿产 / 冶金设备、其他、
主营产品或服务